Centralized Deployment of EasyTier using Docker EasyTier is inherently a decentralized P2P tool where any node can act as a relay server. However, each node's configuration file must be manually edited, which felt somewhat unfamiliar after migrating from Tailscale. Additionally, during the exploration phase, frequent configuration changes are often needed, leading to the decision to deploy EasyTier's Dashboard centrally for unified device management. Project Repository: https://github.com/easytier/easytier The official documentation doesn't explicitly provide a method for deploying the config-server separately, but it's actually quite straightforward, as the server component is already included in the downloaded binary file. This article focuses on installation via Docker Compose. For binary installation, please refer to the reference articles below. Analysis The dashboard deployment consists of two main parts: a backend RESTful API and a frontend web console. The easytier-web-embed binary found in the Releases provides both. Therefore, running this single binary enables the full functionality. Let's Get Started Deploying the API and Web Console Deploying with Docker is straightforward. Two ports need to be exposed: 11211/tcp: API interface, HTTP 22020/udp: For communication between clients (easytier-core) and the server. Volume mapping is required for the container's /app folder to persist data. The Compose file is as follows: services: easytier: restart: always hostname: easytier volumes: - /opt/easytier/api:/app ports: - "127.0.0.1:11211:11211" - "22020:22020/udp" environment: - TZ=Asia/Shanghai image: easytier/easytier:latest entrypoint: easytier-web-embed The image here is the same one used for deploying the client via Docker in the official documentation. The default entrypoint is easytier-core, so running the web API requires specifying the entrypoint as easytier-web-embed. Since the API interface requires HTTPS, the 11211 port is not directly exposed to the public internet here. Instead, it's bound to 127.0.0.1 and then exposed via a reverse proxy with HTTPS. Setting up Reverse Proxy I use 1Panel, so I simply created a new site in the panel and set up a reverse proxy to the configured API port. Registering a Console Account After deployment, open https://your-domain.com (if using the built-in console version, adding /web/ is not necessary). Change the 'Api Host' to https://your-domain.com. Ensure there is no trailing "/" in the Api Host URL, otherwise, strange issues may occur. Click 'Register' below to create an account. Then use this account to log in and access the console. Client Configuration Remove all startup parameters for the client, keeping only --config-server udp://your-ip:22020/your-username. Run the easytier-core binary, and the device should appear in the console. Click the settings button on the right, then click 'Create' to create a network for it. The subsequent steps are the same as in the local GUI mode and won't be detailed here. After saving, select the newly created network from the 'network' dropdown to join it. Because Docker container data is lost on restart, when deploying the client in Docker, a file must be mapped to the container path /usr/local/bin/et_machine_id to save the machine ID. Otherwise, the network will need to be reconfigured after each restart. Additionally, setting the container's hostname can be used as the device name displayed in the web console. Here is my compose file for the client: services: easytier: command: '--config-server udp://<ip>:22020/KaguraiYoRoy' environment: - TZ=Asia/Shanghai hostname: truenas image: easytier/easytier:latest labels: com.centurylinklabs.watchtower.enable: 'true' mem_limit: 0m network_mode: host privileged: True restart: always volumes: - >- /mnt/systemdata/DockerData/easytier/app/et_machine_id:/usr/local/bin/et_machine_id watchtower: command: '--interval 3600 --cleanup --label-enable' environment: - TZ=Asia/Shanghai - WATCHTOWER_NO_STARTUP_MESSAGE image: containrrr/watchtower restart: always volumes: - /var/run/docker.sock:/var/run/docker.sock References: https://blog.mitsea.com/1a57bda595c580088006c17d6ba2a744/ https://github.com/EasyTier/EasyTier/issues/722 https://github.com/EasyTier/EasyTier/issues/577 https://github.com/EasyTier/EasyTier/pull/718

Using Alist to Sync TrueNAS to OneDrive Background I have an E5 subscription and was originally using a solution involving running the driveone/onedrive:edge Docker container to achieve synchronization. However, this solution had drawbacks: firstly, it lacked a GUI/WebUI, and secondly, each sync operation would consume 25%-50% of CPU resources. Considering that TrueNAS's built-in sync solution can sync to WebDAV, I thought of using Alist to mount OneDrive and convert it into WebDAV for TrueNAS to mount. Process Installing Alist Create a persistent storage folder for Alist and write a Docker Compose file according to the official Alist documentation: services: alist: environment: - PUID=3000 - PGID=950 - UMASK=022 image: xhofe/alist:latest ports: - '8088:5244' restart: always volumes: - /mnt/systemdata/DockerData/alist/etc:/opt/alist/data - /mnt/data/Storage:/mnt/data Here, I exposed the Alist port on 8088. Mapping /mnt/data/Storage allows Alist to manage local storage; mapping /mnt/systemdata/DockerData/alist/etc serves as the folder for storing Alist data. Configuring OneDrive on Alist is not discussed in this article; please refer to the official Alist documentation. Here, I mounted my OneDrive at /OneDrive. After setup, go to the Alist admin panel -> Users, edit your user or create a new user, and check the Webdav Read and Webdav Manage permissions to enable WebDAV access for this user. Configuring TrueNAS Sync Go to TrueNAS Admin-Credentials-Backup Credentials, and add a Cloud Credential with the following parameters: Provider: WebDAV Name: Custom URL: Alist address +/dav, e.g., I used http://127.0.0.1:8088/dav WebDAV Service: OTHER Username和Password: Alist account credentials Verify the credential and save it if successful. Next, go to TrueNAS Admin -> Data Protection, and add a Cloud Sync Task. Under Provider, select the WebDAV credential for Alist created earlier. The parameters are explained in detail below: Direction: Choose PULL (cloud to local) or PUSH (local to cloud) Transfer Mode: COPY: Copy files. Files deleted from the source folder later will not be deleted from the target. MOVE: Copy files and then delete them from the source folder after transfer. SYNC: Keep the source and target folders synchronized. Files deleted from the source will also be deleted from the target. Directory/Files: The local file or folder to sync. Folder: The target folder in the cloud storage. Description: Notes. Schedule: Set a schedule using Cron syntax. You can use predefined intervals or write your own. For example, I selected PUSH, SYNC, syncing from /mnt/data/Storage to /OneDrive/TrueNAS, scheduled to run daily at 00:00. After editing, save the task. It will automatically upload local files to OneDrive at the scheduled time. Old Solution Project Address: https://github.com/abraunegg/onedrive Reference Articles: https://alist.nn.ci/zh/guide/install/docker.html https://alist.nn.ci/zh/guide/drivers/onedrive.html

Installing 1Panel Using Docker on TrueNAS Background My TrueNAS has some performance headroom, so I'm thinking of deploying a web service. I want to install a control panel to reduce manual work. Considering the performance overhead of virtual machines, the high memory requirements for ZFS cache, and the fact that the NAS itself isn't very powerful, I decided to use Docker for deployment. Furthermore, since 1Panel itself is distributed as a Docker image, both systems controlling the TrueNAS host's Docker daemon is essentially equivalent to deploying websites directly on the TrueNAS host, making management easier. Analysis {alert type="warning"} This article assumes TrueNAS can access Docker Hub and the Docker daemon is already configured. {/alert} Environment Information Storage Pool There are two storage pools: /mnt/data: 1 x MIRROR | 2 wide | 2.73 TiB | HDD /mnt/systemdata: 1 x DISK | 1 wide | 223.57 GiB | SSD Docker data is stored in storage pool #2. Datasets There are three datasets: Storage: Located in the data storage pool, stores cold data. DockerData: Located in the systemdata storage pool, stores persistent data for containers. KaguraiYoRoy: Located in systemdata, the user's home directory. Installing 1Panel Used the moelin/1panel:latest image for deployment. Many parts of this process can refer to the README written by the image author. Project address: okxlin/docker-1panel Created a folder specifically for storing 1Panel data within the DockerData dataset, which is used as /opt/1panel inside the container, located at /mnt/systemdata/DockerData/1panel. Persistent Volumes To allow 1Panel to manage the host's Docker, map /var/run/docker.sock and the host's Docker directory. Map the data folder created for it earlier. The Docker directory in TrueNAS is different from typical Linux systems. Typically, it's at /var/lib/docker, but in TrueNAS, it's at /mnt/.ix-apps/docker. Environment Variables and Port Mapping The environment variables are the same as those set by the image author, passing TZ=Asia/Shanghai. Port mapping can be set as needed; the container's port is 10086. Docker Compose With the above information, writing the Docker Compose file becomes straightforward. The complete Docker Compose file is as follows: services: 1panel: dns: - 223.5.5.5 environment: - TZ=Asia/Shanghai image: moelin/1panel:latest labels: createdBy: Apps ports: - '8085:10086' restart: always volumes: - /var/run/docker.sock:/var/run/docker.sock - /mnt/.ix-apps/docker:/var/lib/docker - /mnt/systemdata/DockerData/1panel/opt:/opt/1panel - /mnt/systemdata/DockerData/1panel/root:/root - /etc/docker:/etc/docker Mapping /root is because I need to run Git inside the container, and Git config is stored under /root. Setting DNS is because 1Panel needs to download data online when building environment images, and errors occur without specifying DNS. After installation, access the port you set. 1Panel Basic Information: Default Username: 1panel Default Password: 1panel_password Default Entrance: entrance Troubleshooting Docker Mirror During testing, it was found that without setting a mirror source, even with a Proxy configured, installing the PHP environment would fail. Furthermore, configuring both a mirror source and a Proxy also led to installation failure; the reason is unclear. Open /etc/docker/daemon.json on TrueNAS and add registry-mirrors: { "data-root": "/mnt/.ix-apps/docker", "default-address-pools": [ { "base": "172.17.0.0/12", "size": 24 } ], "exec-opts": [ "native.cgroupdriver=cgroupfs" ], "iptables": true, "registry-mirrors": [ "https://docker.1panel.live" ], "storage-driver": "overlay2" } Save the file, restart the host's Docker service, then try installing the environment in 1Panel again. {alert type="warning"} This configuration might be lost after a reboot. Try to install all necessary environments and apps in one go if possible. {/alert} Containers Created by 1Panel Fail to Start This is because in 1Panel, the default folder for storing data is the mapped /opt/1panel. However, the containers actually run on the TrueNAS host and try to access /opt/1panel, which doesn't exist on TrueNAS by default, and its /opt is read-only by default. This causes a "Read-only filesystem" error when starting containers. My solution is straightforward: On the TrueNAS host, first remount /opt as read-write, then create a symbolic link pointing to 1Panel's data folder. cd /opt mount -o remount,rw /opt ln -s /mnt/systemdata/DockerData/1panel/opt 1panel After this, it should work normally. One thing to note: When installing OpenResty in 1Panel, remember to avoid using ports 80 and 443, as these are the default ports for the TrueNAS web UI.